Plenum Front Panel Replacement

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Plenum Front Panel & Mounting Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the windshield wiper transmission. Refer to Windshield Wiper Transmission Replacement (Sedan)Windshield Wiper Transmission Replacement (Coupe) . Remove the air inlet grille panel air deflector. Refer to Air Inlet Grille Panel Air Deflector Replacement (Sedan)Air Inlet Grille Panel Air Deflector Replacement (Coupe) . Remove the left plenum side panel. Refer to Plenum Side Panel Replacement - Left Side . Remove the right plenum side panel. Refer to Plenum Side Panel Replacement - Right Side .
1	Diagonal Brace to Plenum Bolt (Qty 2) CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
2	Plenum Front Panel Bolt (Qty: 5) Tighten 9 N.m (80 lb in)
3	Plenum Front Panel Nut (Qty: 6) Tighten 9 N.m (80 lb in)
4	Plenum Front Panel Procedure Remove the electrical harness grommet from the panel. Ensure all seals are in place before installation.