Hood Replacement (ATS-V)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hood And Mounting Nuts (ATS-V)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Preliminary Procedure Refer to Hood Strut Replacement (ATS-V)
1	Hood Hinge Reinforcement Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Hood Procedure With the aid of an assistant, remove the hood. Transfer components as necessary. Adjust Hood. Refer to Hood Adjustment (ATS-V)

Callout

Component Name

WARNING:

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure Refer to Hood Strut Replacement (ATS-V)

Hood Hinge Reinforcement Nut (Qty: 4)

CAUTION:

Refer to Fastener Caution .

Tighten
22 N.m (16 lb ft)

Hood

Procedure

With the aid of an assistant, remove the hood.
Transfer components as necessary.
Adjust Hood. Refer to Hood Adjustment (ATS-V)