Installation Procedure
WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.
- Assemble the engine front cover. Engine Front Cover Assemble (LGX)
- Use the EN-46109 pins in order to install the engine front cover. Engine Front Cover Installation (LGX)
- Install Water Pump - Water Pump Replacement (LGX)
- Install Water Pump Inlet Pipe - Water Pump Inlet Pipe Replacement (LGX)
- Connect Oil Pump Flow Control Solenoid Valve Electrical Connector
- Position engine harness and attach harness retainers to engine front cover.
- Install the ground cable and the fastener to the front engine cover. Tighten fastener to 22 N.m (16 lb ft)
- Connect Engine Coolant Temperature Sensor Electrical Connector (1)
- Install Engine Coolant Air Bleed Pipe - Engine Coolant Air Bleed Pipe Replacement (LGX)
- Install Crankshaft Balancer - Crankshaft Balancer Replacement (LGX)
- Install the water outlet (2) with radiator hose. Water Outlet Replacement (LGX)
- Install Engine Oil Cooler Adapter - Engine Oil Cooler Adapter Replacement (LGX)
- Install Camshaft Cover - Right Side (2)- Camshaft Cover Replacement - Right Side (LGX)
- Install Camshaft Cover - Left Side (2) - Camshaft Cover Replacement - Left Side (LGX)
- Install Water Pump Pulley (2) - Water Pump Pulley Replacement (LGX)
- Install Air Cleaner Assembly - Air Cleaner Assembly Replacement (LGX)
- Install Oil Pump Flow Control Solenoid Valve Harness - Oil Pump Flow Control Solenoid Valve Harness Replacement
- Fill the cooling system. Cooling System Draining and Filling (Static)Cooling System Draining and Filling (GE 47716)