Engine Coolant Air Bleed Pipe Replacement (LGX)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Coolant Air Bleed Pipe (LGX)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716) Intake Manifold Replacement (LGX) Disconnect Radiator Surge Tank Inlet Hose Replacement (LGX) @Engine Coolant Air Bleed Pipe
1	Engine Coolant Air Bleed Pipe Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Engine Coolant Air Bleed Pipe Procedure Install NEW seals.

Callout

Component Name

Preliminary Procedure

Cooling System Draining and Filling (Static) Cooling System Draining and Filling (GE 47716)
Intake Manifold Replacement (LGX)
Disconnect Radiator Surge Tank Inlet Hose Replacement (LGX) @Engine Coolant Air Bleed Pipe

Engine Coolant Air Bleed Pipe Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
10 N.m (89 lb in)

Engine Coolant Air Bleed Pipe
Procedure
Install NEW seals.