Rear Seat Back Cushion Removal and Installation (without AM9)

WARNING: This page is about a different car, the 2017 Cadillac ATS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Back Cushion (without AM9)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Sedan) Rear Seat Cushion Removal and Installation (Coupe) . Remove the rear compartment rear window lower trim. Refer to Rear Compartment Rear Window Lower Trim Replacement (Sedan)Rear Compartment Rear Window Lower Trim Replacement (Coupe)
1	Rear Seat Back Cushion Nut (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Rear Seat Back Cushion Nut (Qty: 3) Tighten 22 N.m (16 lb ft)
3	Rear Seat Back Cushion Assembly Procedure Pull the seat back cushion forward and upward to remove from the vehicle.