Radiator Support Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Radiator Support, Mount Bolts & Mount Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fascia. Refer to Front Bumper Impact Bar Replacement (GMC) or Front Bumper Impact Bar Replacement (Chevrolet) . Remove the hood latch. Refer to Hood Latch Replacement . Remove the radiator. Refer to Radiator Replacement (4.3, 4.8, 5.3, and 6.0L) or Radiator Replacement (LLM) . Remove the A/C condenser. Refer to Condenser Replacement . Remove the fender bolts. Refer to Front Fender Replacement - Left Side and Front Fender Replacement - Right Side .
1	Radiator Support Mount Nuts (Qty: 2) NOTE: Refer to Fastener Notice . Tighten: 70 N.m (52 lb ft)
2	Radiator Support Mount Bolts (Qty: 2) Tighten: 70 N.m (52 lb ft)
3	Radiator Support Tip: Transfer any parts as needed.