Manual Shift Shaft and Parking System Components Overhaul (6L80/6L90)
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Manual Shaft Detent Lever Hub Pin
CAUTION:
Refer to Pin Reuse Caution
.
|
| 2 | Manual Shift Shaft Pin
CAUTION:
Refer to Pin Reuse Caution
.
|
| 3 | Manual Shift Shaft
CAUTION:
Install the gear flat side down. Failure to install the gear flat side down may result in transmission damage. Tip: Refer to Manual Shift Shaft Seal Replacement . |
| 4 | Manual Shaft Detent Lever Assembly |
| 5 | Park Pawl Actuator Assembly |
| 6 | Park Pawl Actuator Guide Pin
CAUTION:
Refer to Pin Reuse Caution
. Tip: Use a large pair of side cutters to "walk" the pin out. |
| 7 | Park Pawl Actuator Guide |
| 8 | Park Pawl Actuator Guide (O-ring) Seals
CAUTION:
Refer to Seal Reuse Caution
.
|
| 9 | Park Pawl Tip: Inspect for damage only. Do not remove. The park pawl is not a serviceable component. |
| 10 | Park Pawl Spring Tip: Inspect for damage only. Do not remove. The park pawl spring is not a serviceable component. |