LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2006 >> Sierra 1500 HD, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1559 (Bolted Exterior Body Panels And Closures) >> Repair Instructions >> Front Fender Replacement - Right Side

Front Fender Replacement - Right Side

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Front Fender - Right Side
GM1837346Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the headlamp. Refer to Headlamp Replacement (Chevrolet) or Headlamp Replacement (GMC ) or Headlamp Replacement (HD Diesel) .
  2. Remove the front fender rear upper brace. Refer to Front Fender Rear Upper Brace Replacement .
  3. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  4. Remove the air cleaner box tray.
  5. Remove the coolant reservoir bottle from the right fender and set it aside. Do not open the cooling system. Refer to Radiator Surge Tank Replacement (Non-HP2) .
  6. Remove the battery tray. Refer to Battery Tray Replacement .
  7. Remove the right hood hinge. Refer to Hood Hinge Replacement .
  8. Remove the right hood link. Refer to Hood Link Replacement .
  9. Remove the right wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Right Side (Chevrolet) or Front Wheelhouse Liner Replacement - Right Side (GMC) .
1 Right Fender Mounting Bolts (Qty: 6)
CAUTION: Refer to Fastener Caution .

Procedure: 
Apply threadlock compound to the bolts.

Tighten:  30 N.m (22 lb ft)

2 Right Fender Assembly
Tip:  Transfer any necessary additional parts as needed.