Radiator Surge Tank Replacement (Non-HP2)

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radiator Surge Tank (Non-HP2)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Drain the cooling system. Refer to Cooling System Draining and Filling (Vac-N-Fill) or Cooling System Draining and Filling (Static Fill) . Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
1	Surge Tank Bolt CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (89 lb in)
2	Surge Tank Nut Tighten: 10 N.m (89 lb in)
3	Surge Tank Tip: Remove the surge tank hoses from the surge tank.