Front Fender Upper Bracket Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Front Fender Upper Bracket & Bolts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedures Remove the front fender. Refer to Front Fender Replacement - Left Side or Front Fender Replacement - Right Side . Remove the windshield side reveal molding. Refer to Windshield Side Reveal Molding Replacement .
1	Front Fender Upper Bracket Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten: 25 N.m (18 lb ft)
2	Front Fender Upper Bracket

Callout

Component Name

Preliminary Procedures

Remove the front fender. Refer to Front Fender Replacement - Left Side or Front Fender Replacement - Right Side .
Remove the windshield side reveal molding. Refer to Windshield Side Reveal Molding Replacement .

Front Fender Upper Bracket Bolt (Qty: 2)

CAUTION: Refer to Fastener Caution .

Tighten: 25 N.m (18 lb ft)

Front Fender Upper Bracket