Pinpoint Test F: Engagement Quality - Both Forward And Reverse

• Delayed/soft forward and reverse 
  • Check the transmission fluid level. REFER to: Transmission Fluid Level Check .
  • Collect a transmission fluid sample and inspect it for signs of contamination or wear. REFER to: Preliminary Inspection .
  • Carry out the transmission strategy download and the adaptive learning drive cycle. REFER to: Transmission Strategy Download . REFER to: Adaptive Learning Drive Cycle .
  • Carry out the line pressure test. If line pressure is low, refer to the Line Pressure Diagnosis Chart for further diagnosis. REFER to: Special Testing Procedures .

• Harsh forward and reverse 
  • Carry out the transmission strategy download and the adaptive learning drive cycle. REFER to: Transmission Strategy Download . REFER to: Adaptive Learning Drive Cycle .
  • Carry out the line pressure test. If line pressure is high, refer to the Line Pressure Diagnosis Chart for further diagnosis. REFER to: Special Testing Procedures .
  • Check the A and B clutches for a harsh apply condition. REFER to: A Clutch . REFER to: B Clutch .

Possible Sources 

• Corrupted transmission strategy
• Low transmission fluid level
• Low or high line pressure
• Clutch fault
• Internal transmission components

Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods