Symptom Chart: Warning Chimes

Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition	Possible Sources	Actions
All the chimes are inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test A
The active park assist warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BB
The airbag secondary chime has activated	IPC	Install a new IPC. Refer to Instrument Panel Cluster (IPC) .
The airbag secondary warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AS
The Belt-Minder® chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AT
The Belt-Minder® cannot be deactivated	A MyKey® is in the ignition	The system is operating correctly. Use an administrator key to disable the Belt-Minder®.
The chime always sounds	Refer to the Pinpoint Test	GO to Pinpoint Test AU
The chime only sounds from the IPC	Refer to the Pinpoint Test	GO to Pinpoint Test AV
The CTA warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AX
The door ajar warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AY
The forward collision warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AW
The headlamps on warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AZ
The information chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BA
The parking aid chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BB
The parking brake warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BC
The PRNDL not in park warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BD
The seatbelt warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test AT
The turn/hazard signal on warning chime is inoperative	Refer to the Pinpoint Test	GO to Pinpoint Test BE