Pinpoint Test AE : The Stability-Traction Control Indicator (Sliding Car Icon) Is Never Or Always On
- Normal Operation and Fault Conditions
See Stability-Traction Control Indicator (Sliding Car Icon). REFER to: Instrument Panel Cluster (IPC) - System Operation and Component Description .
If the stability-traction control indicator request is missing or invalid for less than 5 seconds, the IPC defaults the stability-traction control indicator (sliding car icon) to the last indication state (on or off), based upon the last message received.
If the IPC does not receive the stability-traction control indicator request for 5 seconds or longer, the IPC defaults the stability-traction control indicator (sliding car icon) on.
Possible Sources
- Communication concern
- Stability-traction control system concern
- IPC
- AE1 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Ignition ON.
- Using a diagnostic scan tool, perform the IPC self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to DTC Chart: Instrument Panel Cluster (IPC) No GO to AE3 - AE2 CHECK THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, check the ABS module Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes REFER to: Anti-Lock Brake System (ABS) . or REFER to: Anti-Lock Brake System (ABS) and Stability Control . No GO to AE3 - AE3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes No GO to AE4 - AE4 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) INDICATOR LAMP CONTROL ACTIVE COMMAND USING A DIAGNOSTIC SCAN TOOL
- Using a diagnostic scan tool, view the IPC Parameter Identifications (PIDs).
- Select the IPC stability-traction control indicator (TC/IVD/RSCLMP) PID.
- Command the stability-traction control indicator (sliding car icon) on and off while observing the stability-traction control indicator (sliding car icon).
Does the stability-traction control indicator (sliding car icon) illuminate when commanded on and turn off when commanded off?
Yes If the stability-traction control indicator (sliding car icon) is never on, the system is operating correctly. If the stability-traction control indicator (sliding car icon) is always on, INSTALL a new ABS module. REFER to: Anti-Lock Brake System (ABS) Module . No INSTALL a new IPC. REFER to: Instrument Panel Cluster (IPC) .