Starting System - 2.5L DURATEC (125KW/170PS)

• Specifications
  • Specifications
    • General Specifications
• Description And Operation
  • Starting System - Overview
    • Starting System
  • Starting System - System Operation and Component Description
    • System Operation
      • System Diagram
      • Network Message Chart
      • Starting System
    • Component Description
      • Integrated Keyhead Transmitter (IKT)
      • Body Control Module (BCM)
      • Passive Anti-Theft Transceiver
      • Ignition Switch
      • Powertrain Control Module (PCM)
• Diagnosis And Testing
  • Starting System
    • Inspection and Verification
    • DTC Chart(s)
      • PCM DTC Chart
      • BCM DTC Chart
    • Symptom Chart: Starting System
    • Pinpoint Tests
      • Pinpoint Test A : The Engine Does Not Crank
        • Notes
        • Pinpoint Test A : The Engine Does Not Crank
      • Pinpoint Test B : Unusual Starter Noise
        • Notes
        • Pinpoint Test B : Unusual Starter Noise
      • Pinpoint Test C : B10E5:11 Or B10E5:15
        • Notes
        • Pinpoint Test C : B10E5:11 Or B10E5:15
      • Pinpoint Test D : P2535
        • Notes
        • Pinpoint Test D : P2535
    • Component Tests
      • Starter Motor - Positive Circuit Test
      • Starter Motor - Ground Circuit Test
• General Procedures
  • Starter Motor Drive Gear and Flywheel Ring Gear Inspection
• Removal And Installation
  • Starter Motor
    • Notes
    • Removal
    • Installation