Engine Cooling - 2.5L DURATEC (125KW/170PS)

• Specifications
  • Specifications
    • Lubricants, Fluids, Sealants and Adhesives
    • Antifreeze
• Description And Operation
  • Engine Cooling - System Operation and Component Description
    • System Operation
      • Notes
      • Fail Safe Cooling
    • Component Description
      • Transmission Fluid Heater Coolant Control Valve
      • Transmission Fluid Cooler Coolant Control Valve
  • Engine Cooling - Component Location
    • Engine Cooling System Exploded View
• Diagnosis And Testing
  • Engine Cooling
    • Notes
    • PCM DTC Chart
    • Inspection and Verification
    • Symptom Chart
    • Pinpoint Tests
      • Pinpoint Test A : Pinpoint Test Loss Of Coolant
        • Notes
        • Pinpoint Test A : Pinpoint Test
      • Pinpoint Test B : Pinpoint Test The Engine Overheats
        • Notes
        • Pinpoint Test B : Pinpoint Test
      • Pinpoint Test C : Pinpoint Test The Engine Does Not Reach Normal Operating Temperature
        • Notes
        • Pinpoint Test C : Pinpoint Test
    • Component Test(s)
      • Cooling System Pressure Test
      • Thermostat Visual Inspection
      • Radiator Leak Test, Removed From Vehicle
• General Procedures
  • Cooling System Draining, Vacuum Filling and Bleeding
  • Cooling System Draining, Filling and Bleeding
  • Radiator Lower Mounting Repair
  • Radiator Upper Mounting Repair
• Removal And Installation
  • Block Heater
    • Notes
    • Removal
    • Installation
  • Coolant Pump
    • Notes
    • Removal
    • Installation
  • Cooling Fan Motor and Shroud
    • Notes
    • Removal
    • Installation
  • Radiator
    • Notes
    • Removal
    • Installation
  • Thermostat
    • Notes
    • Removal
    • Installation