LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2012 >> Mustang Base, 2D Coupe, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Safety Belt System - F150) >> Diagnosis And Testing >> Safety Belt System >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM CHART

Condition Possible Sources Action
  • The safety belt warning indicator does not operate
  • Burned-out indicator/LED
  • Wiring, terminals or connectors
  • Instrument Panel Cluster (IPC)
  • Restraints Control Module (RCM)
  • The safety belt warning chime does not operate
  • Wiring, terminals or connectors
  • Safety belt switch
  • IPC
  • RCM
  • The safety belt retractor webbing does not extract or exhibits excessive pressure on the occupant during use
  • Safety belt retractor is in Automatic Locking Retractor (ALR) mode
  • Safety belt retractor binding internally
  • CARRY OUT the Functional Test - Safety Belt Retractor, ALR Mode. REFER to Component Test  . INSTALL new components as directed.
  • The safety belt retractor webbing does not retract or has excessive slack during use
  • Twisted or incorrectly routed safety belt webbing
  • Safety belt retractor binding internally
  • Safety belt retractor
  • The Belt-Minder® feature is inoperative
  • Wiring, terminals or connectors
  • Belt-Minder® feature is deactivated
  • The safety belt tongue is rotated on the safety belt webbing
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is twisted at the safety belt guide
  • Twisted or incorrectly routed safety belt webbing
  • The safety belt webbing is dirty or soiled
  • Dirty or soiled safety belt webbing