Safety Belt Twisted at the Safety Belt Guide

WARNING: This page is about a different car, the 2012 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: These procedures apply to both wire-formed and stamped D-ring designs.

Grasp the safety belt webbing at the shoulder belt guide (D-ring).

Fig 1: Feeding Folded Portion Of Belt Through Safety Belt Guide (D-Ring)
Courtesy of FORD MOTOR CO.
Feed the folded portion of the safety belt webbing through the safety belt guide (D-ring) to remove the twist from the belt webbing.

Fig 2: Identifying Folded Portion Of Safety Belt Webbing

Courtesy of FORD MOTOR CO.