Tires & Wheels
- Specifications
- Description And Operation
- Diagnosis And Testing
- Wheels And Tires
- Tire Pressure Monitoring System
- Special Tool(s)
- Principles of Operation
- Inspection and Verification
- DTC Charts
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test D: Tire Pressure Monitoring System (TPMS) Indicator ON Solid and Message Center (if equipped) Displays LOW TIRE PRESSURE
- Pinpoint Test E: SJB Will Not Enter Sensor Training Mode When Using the TPMS Sensor Training Procedure
- Pinpoint Test F: TPMS Indicator FLASHES for 70 Seconds and Then Remains ON Solid When the Ignition Key is Turned to the ON Position, the Message Center (if equipped) Displays TIRE PRESSURE SENSOR or MONITOR FAULT and DTC B2872 or B287A is Present
- Pinpoint Test G: DTC B106A
- Pinpoint Test H: DTC B106B
- Tire Pressure Monitoring System (TPMS) Sensor Training
- General Procedures
- Removal And Installation
- Disassembly And Assembly
- Disassembly And Assembly Of Subassemblies