Information Center
- Description And Operation
- Diagnostic Tests
- Information And Message Center
- Notes
- Principles of Operation
- Notes
- Information Displays (Base Instrument Cluster)
- Information Displays (High Series Instrument Cluster)
- Setup Displays (Base Instrument Cluster)
- Setup Displays (High Series Instrument Cluster)
- System Check Displays
- System Warnings
- Outside Air Temperature Sensor (Base Instrument Cluster without Electronic Automatic Temperature Control [EATC])
- Compass
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Message Center Is Not Operating Correctly (High Series Instrument Cluster)
- Pinpoint Test B: The Compass Is Inoperative
- Pinpoint Test C: The Compass Is Inaccurate
- Pinpoint Test D: The Message Center Switch Does Not Operate Correctly (High Series Instrument Cluster)
- Pinpoint Test E: The Outside Air Temperature Display Does Not Operate Correctly
- Pinpoint Test F: The WASHER FLUID LOW LEVEL Warning Is Inoperative
- Pinpoint Test G: The CHECK CHARGING SYSTEM Warning Is Inoperative
- Information And Message Center
- General Procedures
- Removal And Installation