LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2004
>>
Mustang Mach 1, Standard
>>
Repair and Diagnosis (Single Page)
>>
Engine Mechanical
>>
Cooling System (Mechanical)
>>
Engine Cooling System
Engine Cooling System
Expand All (for easy ctrl-f)
Collapse All
Specifications
General Specifications
Torque Specifications
Description And Operation
Engine Cooling
Diagnosis And Testing
Engine Cooling
Special Tool(s)
Inspection and Verification
Symptom Chart
Pinpoint Tests
Pinpoint Test A: Loss Of Coolant
Pinpoint Test B: The Engine Overheats
Pinpoint Test C: The Engine Does Not Reach Normal Operating Temperature
Component Tests
Pressure Test - 3.8L and 3.9L
Pressure Test - 4.6L
Cap - 3.8L and 3.9L
Cap - 4.6L
Thermostat - Water
Thermostat - Electrical Test
Thermostat - Mechanical Test
Radiator Leak Test, Removed From the Vehicle
Fan - Electric Test
General Procedures
Cooling System Draining, Filling and Bleeding
Special Tool(s)
Material
Draining
Filling And Bleeding With RADKITPLUS
Filling - 3.8L and 3.9L without RADKITPLUS
Filling - 4.6L (2V) Without RADKITPLUS
Filling - Cobra Without RADKITPLUS
Filling - Mach I without RADKITPLUS
Bleeding without RADKITPLUS
Engine and Radiator Flushing
Special Tool(s)
Material
Heater Core Backflushing
Special Tool(s)
Material
Removal And Installation
Thermostat - 3.8L and 3.9L
Material
Removal And Installation
Thermostat - 4.6L (2V)
Material
Removal and Installation
Thermostat - 4.6L (4V)
Material
Removal And Installation
Bypass Tube - 3.8L and 3.9L
Material
Removal and Installation
Bypass Tube - Cobra
Material
Removal And Installation
Bypass Tube - Mach I
Material
Removal and Installation
Water Pump - 3.8L and 3.9L
Material
Removal and Installation
Water Pump - 4.6L(2V) and 4.6L(4V)
Material
Removal and Installation
Radiator
Material
Removal and Installation
Cooling Fan Motor and Shroud
Removal and Installation
Water Bypass Hose - 3.8L
Removal And Installation
Degas Bottle - 4.6L (2V) and 4.6L(4V)
Removal And Installation