Convertible Top System
- Specifications
- Description And Operation
- Diagnosis And Testing
- Convertible Top
- Notes
- Special Tool(s)
- Principles Of Operation
- Convertible Top Adjustments
- Inspection And Verification
- Symptom Chart
- Pinpoint Test A: The Convertible Top Does Not Raise/Lower
- Pinpoint Test B: The Convertible Top Hesitates/Comes Up Uneven
- Pinpoint Test C: The Convertible Top Does Not Raise Or Does Not Go Up All The Way
- Pinpoint Test D: The Convertible Top Hydraulic System
- Convertible Top
- General Procedures
- System Bleeding
- Linkage Adjustment
- Material
- The Convertible Top Dowel Pins Fall Forward (Overshoot) or Rearward (Undershoot). The Receiver Cups - Cam Bolt Adjustment
- Convertible Top Lifts Up Unevenly - Lift Cylinder and C-Pivot Inspection
- Convertible Top No. 1 Bow Is Not Flush To The Header - Balance Link Adjustment
- Convertible Top Appears Low At The Center Of The Door Window Glass - B-Hinge Adjustment
- Removal And Installation