Pinpoint Test B: The Convertible Top Hesitates/Comes Up Uneven

B1 CHECK THE MOTOR OPERATION
- Gain access to the convertible top motor/pump assembly.
- Operate the convertible top to the LOWER and RAISE positions while listening to the motor.
- Did the motor stop and then continue at any time?
1. Yes: Go To PINPOINT TEST A: THE CONVERTIBLE TOP DOES NOT RAISE/LOWER .
2. No: GO to B2.
B2 CHECK THE CONVERTIBLE TOP LINKAGE
- Operate the convertible top to the LOWER and RAISE positions while observing the convertible top linkage.
- Did the linkage operate smoothly without binding?
1. Yes: Go To PINPOINT TEST D: THE CONVERTIBLE TOP HYDRAULIC SYSTEM .
2. No: ADJUST the convertible top linkage. REFER to LINKAGE ADJUSTMENT . TEST the system for normal operation.