LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2471 (Handles, Locks, Latches And Entry Systems) >> Diagnosis And Testing >> Handles, Locks, Latches and Entry Systems >> Pinpoint Tests >> Pinpoint Test K: An Individual Button/Feature Is Inoperative From The Remote Keyless Entry (RKE) Transmitter >> Pinpoint Test K: An Individual Button/Feature Is Inoperative From The RKE Transmitter

Pinpoint Test K: An Individual Button/Feature Is Inoperative From The RKE Transmitter

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The panic feature will only operate when the key is in the OFF position.
  1. K1 VERIFY THE DOOR LOCK OPERATION 
    • Press the lock and unlock button from the driver door lock control switch while observing the door lock operation.
    • Do the door locks operate correctly? 
  2. K2 VERIFY THE HORN OPERATION 
    • Enter the following diagnostic mode on the scan tool: SJB  DataLogger.
    • Select the SJB  PID (HORN) and active command the horn on.
    • Does the horn sound when commanded on? 
    • Yes:  GO to K3  .
    • No:  REFER to HORN .
  3. K3 VERIFY THE HAZARD LAMP OPERATION 
    • Place the hazard switch in the ON position.
    • Do the hazard lamps operate correctly? 
  4. K4 VERIFY THE LIFTGATE WINDOW LATCH OPERATION 
      NOTE: The doors must be unlocked electronically before verifying the liftgate window release operation.
    • Press the liftgate window release button.
    • Does the liftgate window release? 
scientia non olet · About LEMON Manuals