- The wipers are inoperative - windshield
|
- Fuse(s)
- Multi-function switch
- Circuitry
- Windshield wiper motor
|
|
- The wipers are inoperative - rear window
|
- Fuse(s)
- Multi-function switch
- Circuitry
- Rear window wiper motor
|
|
- The wipers stay on continuously - windshield
|
- Windshield wiper motor
- Multi-function switch
- Circuitry
|
|
- The wipers stay on continuously - rear window
|
- Rear window wiper motor
- Multi-function switch
- Circuitry
|
|
- The high/low wiper speeds do not operate correctly - windshield
|
- Multi-function switch
- Circuitry
- Windshield wiper motor
|
|
- The intermittent wiper speed does not operate correctly - rear window
|
- Multi-function switch
- Circuitry
- Rear window wiper motor
|
|
- The intermittent wiper speed does not operate correctly - windshield
|
- Multi-function switch
- Circuitry
- Windshield wiper motor
|
|
- The wash and wipe function is inoperative - windshield
|
|
- If the washer pump is inoperative, go to Pinpoint Test H .
- If the washer pump is operative, INSTALL a new windshield wiper motor. TEST the system for normal operation.
|
- The wash and wipe function is inoperative - rear window
|
- Multi-function switch
- Circuitry
- Washer pump
- Rear window wiper motor
|
- If the washer pump is inoperative, go to Pinpoint Test H .
- If the washer pump is operative, INSTALL a new rear wiper motor. TEST the system for normal operation.
|
- The washer pump is inoperative
|
- Circuitry
- Windshield washer pump
- Multi-function switch
- Windshield wiper motor
- Rear window wiper motor
|
|
- The wipers will not park at the correct position - windshield
|
- Linkage
- Windshield wiper motor
|
- If the wipers immediately stop on the windshield as soon as they are turned off, INSTALL a new windshield wiper motor.
|
| |
|
|
- The wipers will not park at the correct position - rear window
|
|
|
- The headlamps do not illuminate when the wipers are on
|
- Circuitry
- Windshield wiper motor
- SJB
|
|