LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2116 (Wiper System And Washer System) >> General Procedures >> Wiper Blade and Pivot Arm Adjustment - Rear

Wiper Blade and Pivot Arm Adjustment - Rear

WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cycle and park the rear window wiper.
  2. Verify that the rear window wiper blade is located at the specified position.
  3. Fig 1: Identifying Wiper Blade Position With Specification
    GF0041899Courtesy of FORD MOTOR CO.
  4. If not within specification, remove the rear window wiper pivot arm and reposition it to the correct location. For additional information, refer to Wiper Pivot Arm - Rear .