Using Hybrid Electronic Cluster

WARNING: This page is about a different car, the 2002 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

To enter Hybrid Electronic Cluster (HEC) self-diagnostics, press and hold instrument cluster SELECT/RESET button before turning ignition switch to RUN position. Within 5-8 seconds, odometer will display "tESt". SELECT/RESET button must be released within 3 seconds of odometer displaying "tESt" then, repeatedly press SELECT/RESET button through odometer displays until "dtc" is displayed. When odometer displays "dtc", press SELECT/RESET button again and any continuous diagnostic trouble codes will be displayed before odometer advances to next display. See HYBRID ELECTRONIC CLUSTER DIAGNOSTIC TROUBLE CODE INDEX . Other HEC diagnostic modes can be entered when self-diagnostic function is entered. See HYBRID ELECTRONIC CLUSTER SELF-DIAGNOSTICS MODES .