LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (Air Bag Restraint Systems) >> Diagnostic Tests >> Code 7: Air Bag Diagnostic Monitor Fault >> Verify Condition

Verify Condition

WARNING: This page is about a different car, the 2002 Mercury Villager. However, it is still accessible from the selected car via links, so may be relevant.

Place air bag system in diagnostic mode and check for Code 7. See DIAGNOSIS MODE & RETRIEVING CODES  under DIAGNOSTICS. If AIR BAG warning light flashes Code 7, replace air bag diagnostic monitor. See DIAGNOSTIC MONITOR  under REMOVAL & INSTALLATION. Clear air bag system fault codes. See CLEARING CODES  under DIAGNOSTICS. Perform system operation check. See SYSTEM OPERATION CHECK  under . If AIR BAG warning light does not flash Code 7, inspect air bag system wiring harness, connectors, spices and crimps for intermittent faults.