Temp/Oil Gauge Inoperative, Pointer Does Not Move
- Verify that temp/oil gauge is inoperative. If pointer does not move, go to next step. If pointer moves, perform TEMP/OIL GAUGE INACCURATE test.
- Check power to cluster by turning ignition on. Observe all other gauges and warning lights for proper operation. If necessary, use voltmeter to check voltage at "B+" terminal of cluster connector.
- If other gauges and warning lights operate properly (voltage is present at cluster), perform TEMP/OIL GAUGE INACCURATE test. If other gauges and warning lights do not operate properly (no voltage at cluster), repair wiring in power circuit.