LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Distribution >> Housing, HVAC >> Disassembly

Housing, HVAC: Disassembly

WARNING:

Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

  1. Remove the A/C evaporator. Refer to EVAPORATOR, A/C, REMOVAL .
  2. Remove the air distribution housing from the HVAC housing. Refer to HOUSING, HVAC, REMOVAL .
  3. Remove the blower motor from the bottom of the HVAC housing. Refer to MOTOR, BLOWER, REMOVAL .
  4. Remove the blower motor power module. Refer to MODULE, POWER, BLOWER MOTOR, REMOVAL .