LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating & Air Conditioning (Service Information) >> Distribution >> Motor, Blower >> Removal

Motor, Blower: Removal

WARNING:

Disable the airbag system before attempting any steering wheel, steering column, or instrument panel component diagnosis or service. Disconnect and isolate the negative battery (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions may result in accidental airbag deployment and possible serious or fatal injury.

  1. Disconnect and isolate the negative battery cable.
    GC0160274Courtesy of CHRYSLER GROUP, LLC
  2. Remove the silencer from underneath the passenger side of the instrument panel.
  3. Disconnect the wire harness connector (2) from the blower motor.
  4. Remove the three screws (1) that secure the blower motor to the HVAC housing and remove the blower motor.