LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2023 >> ProMaster 2500 >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.6L Engine (Service Information) (2 Of 2) >> Engine Block >> Seal, Crankshaft Oil, Rear >> Removal

Seal, Crankshaft Oil, Rear: Removal

  1. Remove the oil pan. Refer to PAN, OIL, REMOVAL .
  2. Support the rear of the engine with a screw-jack when removing the transmission. Position the support on the engine oil pan flange and not the windage tray.
  3. Remove the flexplate. Refer to FLEXPLATE, REMOVAL .
    GC0144181Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    The rear crankshaft oil seal is incorporated into the seal retainer (2) and can not be removed from the retainer. The rear crankshaft oil seal and seal retainer (2) are serviced as an assembly.

  4. Remove the oil seal retainer fasteners (1).
  5. Remove and discard the seal retainer (2).
scientia non olet · About LEMON Manuals