Adapter, Disc Brake Caliper: Removal: Front
- Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
- Remove the front wheel and tire assembly. Refer to REMOVAL
.CAUTION:
Never allow the disc brake caliper to hang from the brake hose. Damage to the brake hose will result. Provide a suitable support to hang the caliper securely.
- Remove the brake caliper from the brake caliper adapter, using a suitable device, support the disc brake caliper. Refer to CALIPER, DISC BRAKE, REAR, REMOVAL . Do not let the disc brake caliper hang by the brake hose.
- Remove the front brake pads. Refer to PADS, BRAKE, REAR, REMOVAL .
- Remove and DISCARD
the brake pad anti-rattle clips.
- Remove the disc brake caliper adapter mounting bolts (1).
- Remove the brake caliper adapter.