LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2018 >> Charger SXT Plus >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Nag1 Automatic Transmission (Service Information)) >> Lever, Gearshift >> Installation >> Gearshift Lever - Instrument Panel Mounted Installation

Gearshift Lever - Instrument Panel Mounted Installation

WARNING: This page is about a different variant/trim than selected.
  1. Position the gearshift lever in the vehicle.
    GC0162382Courtesy of CHRYSLER GROUP, LLC
  2. Install the gearshift lever screw (1) and tighten to the proper specification. Refer to TECHNICAL SPECIFICATIONS .
    GC0162390Courtesy of CHRYSLER GROUP, LLC
  3. Connect the gearshift lever electrical connector (1).
    GC0162398Courtesy of CHRYSLER GROUP, LLC
  4. Install the steering column shroud gap hider screw (1).
  5. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, INSTALLATION .
  6. Install the instrument panel bezel. Refer to BEZEL, INSTRUMENT CLUSTER, INSTALLATION .
  7. Verify the transmission shifts in and out of PARK and the other gear ranges.
scientia non olet · About LEMON Manuals