LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2019 >> 300 C >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Exterior >> Fender, Front >> Removal

Fender, Front: Removal

GC0144750Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the front wheel.
  4. Remove the front wheelhouse splash shield. Refer to SHIELD, SPLASH, REAR WHEELHOUSE, REMOVAL .
  5. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
  6. Remove the headlight. Refer to UNIT, FRONT LAMP, REMOVAL .
  7. Remove the two fasteners (1) securing the fender's front dogleg to the front end module.
    GC0144751Courtesy of CHRYSLER GROUP, LLC
  8. Accessing through the wheelhouse, remove the bolt (1) securing the fender's rear dogleg to the bodyside bracket.
    GC0144753Courtesy of CHRYSLER GROUP, LLC
  9. Remove the rocker panel/cladding.
  10. Remove the two bolts (1) securing the lower fender dogleg to the sill.
    GC0144752Courtesy of CHRYSLER GROUP, LLC
  11. Lower the vehicle.
  12. Open the hood and support with a suitable prop or block.
  13. Remove the hood hinge (2). Refer to HINGE, HOOD, REMOVAL .
  14. Remove the fasteners (1) securing the inner fender ledge.
  15. Remove the fender from the vehicle.
scientia non olet · About LEMON Manuals