LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Heating & Air Conditioning - (Service Information) - 2500 Hd) >> Distribution >> Duct, Floor Console >> Removal

Duct, Floor Console: Removal

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0089532Courtesy of CHRYSLER GROUP, LLC
NOTE:

Illustration shown with seat cushions removed for clarity.

NOTE:

Automatic transmission model shown. Manual transmission model similar.

  1. Remove the floor console. Refer to CONSOLE, FLOOR, LID, REMOVAL .
  2. Disengage the floor console duct (1) from the rear duct adapter (3) and slide the adapter rearward into the rear duct (2).
  3. Disengage the floor console duct from the stud (4) on the floor panel.
  4. Disengage the floor console duct from the rear floor distribution duct (5) and remove the console duct.
    GC0083799Courtesy of CHRYSLER GROUP, LLC
    NOTE:

    Illustration shown with center front seat removed for clarity.

  5. If required, remove the front seat. Refer to SEAT, FRONT CENTER, REMOVAL .
  6. Remove the three push-pin retainers (1) that secure the rear duct (2) to the bottom of the center seat support (3).
  7. Disengage the rear duct from the rear outlet (4) and remove the rear duct.
scientia non olet · About LEMON Manuals