LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2011 >> 300 C, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1580 (Fuel System - 2500 Hd) >> Fuel Delivery, Gas >> Standard Procedure >> Draining Fuel Tank >> Alternative Procedure

Alternative Procedure

WARNING: This page is about a different car, the 2017 RAM 2500 HD. However, it is still accessible from the selected car via links, so may be relevant.
GC0087848Courtesy of CHRYSLER GROUP, LLC
NOTE:

If the electric fuel pump is not operating, the fuel tank must be removed and drained through the fuel pump module opening of the fuel tank.

  1. Perform the Fuel System Pressure Release procedure. Refer to FUEL SYSTEM PRESSURE RELEASE  .
  2. Disconnect and isolate the negative battery cable (1).
  3. Raise and support the vehicle.
  4. Remove the fuel tank. Refer to TANK, FUEL, REMOVAL .
    GC0088247Courtesy of CHRYSLER GROUP, LLC
  5. Remove the fuel pump module (1). Refer to MODULE, FUEL PUMP, REMOVAL .
  6. Position a 3/8" hose into the fuel pump module opening of the fuel tank.
  7. Attach the opposite end of this hose to the Fuel Chief Gas Caddy 320-FC-P30-A or an OSHA approved gas caddy.
  8. Using the gas caddy, evacuate the fuel tank.
scientia non olet · About LEMON Manuals