LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Audio System (Service Information)) >> Antenna Cable-Instrument Panel >> Removal

Antenna Cable-Instrument Panel: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cable At Instrument Panel
GC0015559Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Disconnect and isolate the battery negative cable.
  2. Remove the radio (Refer to ELECTRICAL/AUDIO/RADIO - REMOVAL) .
  3. Remove the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - REMOVAL) .
  4. Remove the right side cowl trim.
  5. Disconnect antenna cable at right side cowl area.
  6. Remove cable from instrument panel.