Bin-Glove Box: Removal

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bin-Glove Box R and I

Courtesy of DAIMLERCHRYSLER CORP.

Open the glove box bin (1).
Push in on both sides of glove box bin to disengage the glove box stops (2) and lower the bin.
Pivot the glove box bin downward and disengage the bin hinge hooks (3) from the instrument panel hinge brackets (4) located at each end of the bin.

Fig 2: Bin-Glove Box Support Strap
Courtesy of DAIMLERCHRYSLER CORP.
Turn the glove box bin (1) sideways and remove the support strap and retainer assembly (2) from the outboard end of the bin.
Remove the glove box bin from the vehicle.