LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2009 >> 300 Signature Series >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Audio System (Service Information)) >> Antenna Cable-Instrument Panel >> Installation

Antenna Cable-Instrument Panel: Installation

WARNING: This page is about a different car, the 2006 Dodge Magnum, 2006 Dodge Charger, and 2006 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Cable At Instrument Panel
GC0015560Courtesy of DAIMLERCHRYSLER CORP.
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected. (Refer to ELECTRICAL/BATTERY SYSTEM - STANDARD PROCEDURE) .
  1. Install cable to instrument panel.
  2. Connect antenna cable at right side cowl area.
  3. Install the right side cowl trim.
  4. Install the glove box (Refer to BODY/INSTRUMENT PANEL/GLOVE BOX - INSTALLATION) .
  5. Install the radio (Refer to ELECTRICAL/AUDIO/RADIO - INSTALLATION) .
  6. Connect the battery negative cable.