LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Steering Linkage >> Rack & Pinion Power Steering System >> Pump >> Reservoir >> Removal >> 2.2L Diesel

2.2L Diesel

NOTE: Before proceeding, (Refer to STEERING - WARNING) .
  1. Remove the engine top appearance cover.
  2. Remove the engine air cleaner. (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL) or (Refer to ENGINE/AIR INTAKE SYSTEM/AIR CLEANER HOUSING - REMOVAL)
  3. Siphon as much fluid as possible from power steering fluid reservoir.
    Fig 1: Return Hose Mounting
    GC0042979Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the hose clamp securing the return hose (2) to the reservoir fitting. Slide the hose off the end of the reservoir fitting.
    Fig 2: Hoses At Pump And Reservoir
    GC0021719Courtesy of DAIMLERCHRYSLER CORP.
    1 - FLUID RESERVOIR
    2 - SUPPLY HOSE
    3 - PRESSURE HOSE
  5. Remove the hose clamp securing the supply hose (2) to the reservoir fitting. Slide hose off end of reservoir fitting.
    Fig 3: Power Steering Fluid Reservoir Mounting
    GC0021739Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the mounting bolts securing the reservoir in place. Remove the reservoir.