Instrument Panel: Bezel-Cluster: Installation

NOTE: LHD model shown in illustration. RHD model similar.

Fig 1: Bezel-Cluster - Installation

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: Steering column removed from illustration for clarity.

1. If removed, install the instrument panel air outlet onto the back of the cluster bezel (Refer to HEATING & AIR CONDITIONING/DISTRIBUTION/OUTLETS-AIR - INSTALLATION) .
2. Install the cluster bezel (1) onto the instrument panel (2). Make sure the snap retainers are fully engaged to the instrument panel.
3. Install the left instrument panel end cap (Refer to BODY/INSTRUMENT PANEL/END CAP-INSTRUMENT PANEL - INSTALLATION) .
4. Install the steering column opening cover (Refer to BODY/INSTRUMENT PANEL/COVER-STEERING COLUMN OPENING - INSTALLATION) .
5. Install the instrument panel top cover (Refer to BODY/INSTRUMENT PANEL/COVER-INSTRUMENT PANEL TOP - INSTALLATION) .
6. Reconnect the negative battery cable.