Cover-Instrument Panel Top: Installation

Fig 1: I/P COVER

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: LHD model shown in illustration. RHD model similar.

1. Position the instrument panel top cover (1) onto the instrument panel (2) and engage the retainers that secure the top cover to the front of the instrument panel.
2. Engage the snap retainers that secure the instrument panel top cover to the top of the instrument panel.
3. Install the left and right A-pillar trim (Refer to BODY/INTERIOR/TRIM-A-PILLAR - INSTALLATION) .
4. Reconnect the negative battery cable.