LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior (1 Of 2) >> Instrument Panel >> Cover-Steering Column Opening >> Installation

Cover-Steering Column Opening: Installation

  1. Position the steering column opening reinforcement bracket to the instrument panel.
  2. Install the screws that secure the steering column opening reinforcement bracket to the instrument panel. Tighten the screws to 2.2 N.m (20 in. lbs.).
  3. Position the bottom of the steering column opening cover to the steering column opening reinforcement bracket and install the cover onto the retainer clips of the reinforcement bracket.
  4. Carefully raise the top of the steering column opening cover upward and engage the snap retainers to the instrument panel.
  5. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals