Battery Tray: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Install the battery tray and retaining bolts. Torque the bolts to 14 N.m (160 in. lbs.).
- Install the battery in the vehicle (Refer to ELECTRICAL/BATTERY SYSTEM/BATTERY - INSTALLATION) .
- Install the left headlamp assembly in the vehicle (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION) .
- Connect the remote negative battery cable.