Section 83 (Battery System - Except Coupe): Battery: Installation
WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
- Position the battery in the battery tray.
- Connect the positive and negative battery cables. Torque to 16 N.m (150 in. lbs.).
- Connect the heater blanket cord, if equipped.
- Install the battery hold down and install the hold down bolt. Torque to 16 N.m (150 in. lbs.).
- Install battery splash shield. Refer to INTERIOR/EXTERIOR - EXCEPT COUPE for the procedure.
- Connect the negative battery cable.