LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Headlamp Unit - Export -- Except Coupe) >> Headlamp Unit - Export >> Installation

Headlamp Unit - Export: Installation

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the position lamp to the reflector.
  2. Carefully reinstall the rubber boot, making sure to get a full perimeter seal around the back of the reflector and the headlamp unit.
  3. Connect the wire harness.
  4. Connect wire harness to headlamp leveling motor.
  5. Install headlamp unit.
  6. Install the retaining screws.
  7. Install upper fascia retainers.
  8. Connect the battery negative cable.
scientia non olet · About LEMON Manuals