LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Interior >> B-Pillar Lower Trim >> Removal

B-Pillar Lower Trim: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove upper B-pillar trim. (Refer to BODY/INTERIOR/UPPER B-PILLAR TRIM - REMOVAL) 
  2. Disengage clips attaching seat belt access panel to lower B-pillar trim. See Figure.
  3. Remove scuff plates. (Refer to REMOVAL  )
  4. Remove the screws attaching the trim to the door sills.
  5. Disengage clips attaching lower B-pillar trim to B-pillar.
  6. Route seat belt webbing through access hole in lower B-pillar trim.
  7. Remove lower B-pillar trim from vehicle.
scientia non olet · About LEMON Manuals