LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Interior & Exterior - Except Coupe) >> Interior >> Upper B-Pillar Trim >> Removal

Upper B-Pillar Trim: Removal

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the door opening weatherstrips. (Refer to BODY/WEATHERSTRIP/SEALS/DOOR OPENING WEATHERSTRIP - REMOVAL) 
  2. Pry shoulder belt knob straight off height adjuster using a trim stick (C-4755).
  3. Remove seat belt turning loop cover.
  4. Remove bolt attaching turning loop to height adjuster.
  5. Remove bolt attaching seat belt lower anchor to floor.
  6. Disengage clips attaching upper B-pillar trim to B-pillar.
  7. Remove upper B-pillar trim from vehicle. See Figure.
scientia non olet · About LEMON Manuals