LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Suspension System - Except Coupe) >> Rear Suspension >> Upper Ball Joint >> Diagnosis And Testing - Upper Ball Joint >> Alternate Method

Alternate Method

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support vehicle. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  2. Remove tire and wheel assembly. (Refer to TIRES/WHEELS - REMOVAL)
  3. Push inward and pull outward on neck of knuckle near ball joint while observing ball joint for movement. Holding a finger against knuckle and upper control arm while performing this helps to sense movement.
  4. If movement is noted, replace upper control arm.
scientia non olet · About LEMON Manuals