LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2001 >> Sebring LX, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Tires & Wheels - Except Coupe) >> Tires/Wheels >> Removal - Tire And Wheel Assembly

Removal - Tire And Wheel Assembly

WARNING: This page is about a different car, the 2005 Dodge Stratus and 2005 Chrysler Sebring. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle so the tires clear ground level. (Refer to LUBRICATION & MAINTENANCE/HOISTING - STANDARD PROCEDURE)
  2. If the vehicle is equipped with wheel covers, remove the cover from the wheel by prying it off with an appropriate wheel cover removal tool.
  3. Remove the wheel mounting (lug) nuts from the studs.
  4. Remove the tire and wheel assembly from the hub.
scientia non olet · About LEMON Manuals